LG 26LT670H Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 68

background image

10

206-4213

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the

Pro:Centric Server Admin Client User Guide

. This document describes only those settings that must be

specified on the TVs.
On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/

administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the

Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides

remote management/administration facilities for downloading splash screens and software/firmware

updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for

TVs that are in FTG Mode via CPU.

• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,

comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric

application settings are managed via the Pro:Centric Admin Client.

The Data Channel and Pro:Centric Application Mode can be set using one of the following methods:
• When the TV is in a factory default state, the Automated Installation Routine Wizard provides Auto or

Manual options for configuring both the Data Channel and the Pro:Centric Application Mode.
The Automated Installation Routine Wizard also provides a USB Configuration option that enables you

to configure a TV for FTG Mode via CPU using an FTG Configuration (.tlx) file stored on a USB memory

device. The FTG Configuration file incorporates FTG Installer Menu settings, which includes Installer

Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL.
Refer to “Automated Installation Routine Wizard” on pages 11 to 13 for further information on the

Automated Installation Routine Wizard options.

• If the TV is in Pass-through Mode, set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL

to the appropriate values. Refer to “Installer Menu” information on pages 18 to 26 for further information.

Also, as necessary, refer to “Custom Master TV Setup” information on pages 14 to 17 and/or cloning

information on pages 28 to 36.

• If the TV is in FTG Mode (via CPU or EBL), use the appropriate software to update the Pro:Centric

and Data Channel Installer Menu items and then transfer the FTG Installer Menu settings to the TV in

accordance with the FTG Mode of configuration. Refer to FTG Mode information on pages 37 to 48 for

further information.

Pro:Centric Operation (Cont.)

«
...
8
9
10
11
12
...
»

Содержание 26LT670H





































































Отзывы:

Нет отзывов

Похожие инструкции для 26LT670H

UN46C9000 Series

Бренд: Samsung Страницы: 7

Бренд: Samsung Страницы: 36

Бренд: Samsung Страницы: 36

Бренд: Samsung Страницы: 154

Бренд: Samsung Страницы: 45

Бренд: Samsung Страницы: 143

Бренд: Panasonic Страницы: 90

Бренд: Samsung Страницы: 289

Бренд: Samsung Страницы: 198

Бренд: Supersonic Страницы: 44

Бренд: Daewoo Страницы: 49

Бренд: Daewoo Страницы: 18

Google TV 98C735 Series

Бренд: TCL Страницы: 24

Бренд: Pixstorm Страницы: 13

Бренд: Telefunken Страницы: 34

Бренд: Sansui Страницы: 50

Бренд: Daewoo Страницы: 50

Бренд: Gogen Страницы: 150

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды