14
206-4190
Custom Master TV Setup (Cont.)
After verifying the TV Setup, set Installer
Menu item 028 CH. OVERIDE to 000.*
DIGITAL 19-3
WXYZ
MONO STEREO SAP
Custom Text Label “WXYZ” created
in 2-5-4 + MENU Mode.
(Continued from previous page)
5. (Optional) Add Custom Channel and Aux Input Labels:
2-5-4 + MENU Mode
Note:
2-5-4 + MENU Mode enables you to add/edit channel icons
and custom text labels in the PTC once the Master TV Setup has
been transferred as described in the previous step.
Enter the Installer Menu, and press
2-5-4
+
MENU
on the Installer
Remote. Add/edit custom text labels and/or change icons for the
Channel-Time on-screen displays (see 2-5-4 + MENU procedural
information on page 22). Note that broadcast digital channels often
already have a broadcaster generated label. When you are finished,
press
MENU
to exit 2-5-4 + MENU Mode.
6. Verify the TV setup.
Verify that the channel lineup, channel icons, and custom text labels are
correct. Also, make sure the TV features are set per your requirements.
7. Set up channel banks.
Set up channel banks, as desired (see pages 23 to 26).
Note:
When you lock the channel lineup (see next step), the Channel
Banks Setup Menu is no longer accessible via the Installer Remote. If
you wish to set up channel banks at a later time, you will need to set
Installer Menu item 028 CH. OVERIDE to 001 to enable access to the
Channel Banks Setup Menu.
8. (Recommended) Lock the channel lineup.
Enter the Installer Menu. Set item
028 CH. OVERIDE
to
000
and press
OK
(Enter)
to lock the channel lineup and restrict access to the TV
setup menus. Press
OK
(Enter)
again to save your changes and exit
the Installer Menu. *
The Master TV Setup is now ready to be copied to the predetermined
cloning tool—a USB memory device or a clone programmer. See cloning
procedures in this document.
*
This step prevents end users from
accessing channel settings (i.e., the
Channel Menu will be inaccessible/
grayed out).
028 CH. OVERIDE 000
