LG SIGNATURE LSWD100E страница 61 Скачать руководство пользователя

Страница: 61 / 64

TROUBLESHOOTING

ENGLISH

ezDispense

Wrinkling

Appliance is not unloaded promptly.

• Always remove items from the appliance as soon as the programme is

complete.

Appliance is overloaded.

• The appliance can be fully loaded, but the drum should not be tightly

packed with items. The door of the appliance should be closed easily.

Hot and cold water supply hoses are reversed.

• Hot water rinse can set wrinkles in garments. Check the supply hose

connections.

Spin speed may be too high.

• Set the spin speed to suit the garment type.

Symptoms

Possible Cause & Solution

Refill Alarm continues

to display when

detergent/softener is

added.

Detergent/softener has built up on the fluid level sensor.

• Open the compartment covers and clean the insides of the

ezDispense

compartments with warm water. Use a soft brush to remove any residue.

If the

Refill Alarm

is displayed continuously, call for service.

The amount of detergent/softner is not enough for the sensor to detect.

• Fill the detergent/softner up to the

MAX

line in the compartment.

Too much/too little

detergent or softener

dispensed.

The default dispense amounts setting may need to be changed.

• Check and change the default dispense amounts setting.

The ezDispense doesn't

dispense detergent/

softener.

The ezDispense function is off.

• Turn on the

ezDispense

function.

The ventilation holes are blocked.

• Clean the ventilation holes for the lids on the compartments with warm

water.

The detergent or softener in the ezDispense compartments has

hardened.

• Clean the

ezDispense

compartments and change the detergent or

softener.

There's foam on the

rinsing course, and

there's detergent left

on the clothes after the

washing.

Detergent was used when rinsing.

• Please make sure that the detergent/softner is stored correctly. (right:

detergent / left: softener)

Symptoms

Possible Cause & Solution

Содержание LSWD100E

































































Результаты поиска

Содержание LSWD100E

Отзывы:

Похожие инструкции для LSWD100E

Бренды по названию

Популярные бренды

LG SIGNATURE LSWD100E, Руководство пользователя

Результаты поиска

Содержание LSWD100E

Отзывы:

Похожие инструкции для LSWD100E

Бренды по названию

Популярные бренды