52
EN
How to Handle Freezing
•
Make sure to empty the drum, pour warm
water of 50–60 °C up to the rubber part inside
the drum, close the door, and wait for 1–2
hours.
50-60 °C
CAUTION
•
Do not use boiling water. It may cause burns or
damage to the product.
•
Open the cover cap and hose plug used for
removal of residual water to extract water
completely.
Drain filter
Drain plug
NOTE
•
If water does not drain, this means the ice is
not melted completely. Wait more.
•
When water is removed completely from the
drum, close the hose plug used for removal of
residual water, choose a washing programme,
and press the
Start/Pause
button.
Drain hose
NOTE
•
Check that water is coming into the detergent
drawer while rinsing, and water is draining
through the drain hose while spinning.
•
When water supply problems occur, take the
following measures.
−
Turn off the tap, and thaw out the tap and
both connection areas of inlet hose of the
product using a hot water cloth.
−
Take out inlet hose and immerse in warm
water below 50–60 °C.
Supply hose
50-60 °C
Содержание FG1612H1WP
