background image

25

NOTE

 

Before using the appliance, check if there is 

any detergent in the auto dispense box.

 

When the auto dispenser's detergent reservoir 

is filled with detergent, the detergent will last 

for about 18 standard cycles with half a load of 

laundry in drum.

 

The default settings are configured to 

automatically dispense 70 ml of detergent and 

30 ml of softener for 4 - 6 kg of normally soiled 

laundry. This can be changed using the 

More 

Settings

 button. For more details, refer to 

“Auto Dispense”

.

 

When you wash laundry with a load size of 

4 - 6 kg, please refer to the recommended 

amount of the detergent as indicated by the 

detergent maker.

 

When you select 

Auto Wash

Auto Detergent

 

is automatically turned on.

 

Turn on the detergent/softener refill alarm to 

be notified of when to refill.

 

Remove any residual detergent outside the 

auto dispense box before refilling it.

 

If you want to use a different type of detergent, 

follow the steps as shown above.

 

Do not use force to pull out the auto dispense 

box.

 

Pour detergent or softener into the respective 

reservoir and push the box back inside until 

you hear a clicking sound.

 

To set Auto Detergent in a programme 

where the use of a neutral detergent is 

recommended, press the Cancel button when 

you are prompted with the message to supply 

wool detergent. The detergent will then be 

dispensed automatically.

EN

CAUTION

 

Pull out the dispensing box only when refilling 

or replacing detergent.

 

Please use liquid detergents for drums only.

 

Do not put any detergent powder into the auto 

dispense box.

 

Do not put liquid bleach into the auto dispense 

box.

 

The auto dispensing function may not 

work properly with some concentrated gel 

detergents. Please use a separate cup instead 

to dispense the gel detergent.

 

Be careful not to mix detergent with a fabric 

softener.

 

When you pull or insert the auto dispense box, 

the liquid detergent and the fabric softener 

may spill out onto the floor. Please wipe them 

away.

 

Before using the auto detergent/softener, 

make sure the 

Auto Dispense

 function is 

turned on in the Settings.

 

Do not leave detergent or fabric softener in the 

reservoirs for a long time as they may harden 

and fail to dispense automatically.

 

The holes on the left and the right as shown in 

the figure below are ventilation holes that help 

with the automatic dispensing of the detergent 

and softener. If you hold the dispensing box 

upside down, the detergent and the softener 

may leak out of it.

Ventilation 

hole

Ventilation 

hole

Front

Rear

 

If the ventilation holes are blocked, the Auto 

Dispense function may not work properly. 

Check them when you clean the dispensing 

box.

EN

Dispensing Detergent Manually

You may disable the Auto Detergent function if 

necessary.

 

To dispense a different kind of detergent 

(powder detergent, neutral detergent, or 

oxygen-based bleach) manually without 

using the Auto Detergent function, use the 

separately provided Rubber bowl.

1

Turn off 

Auto Detergent

 function.

2

Put detergent in the Rubber bowl.

3

Put the Rubber bowl into the drum.

NOTE

 

Dispense the detergent by referring to the 

scale mark in the Rubber bowl.

 

When washing is finished, wash the Rubber 

bowl clean before storing it.

 

To use fabric softener, turn on the 

Auto 

Softener

 function.

 

Do not use the Rubber bowl with the 

Auto 

Detergent

 function turned on. Excessive suds 

will remain even after rinsing, causing a longer 

rinsing time or preventing a proper rinsing.

 

When you use the Delay Wash function, Auto 

Dispense is recommended.

 

You may store the Rubber bowl by folding it as 

shown in the figure below.

CAUTION

 

Dispense the fabric softener using the Auto 

Detergent function.

 

Put the Rubber bowl in carefully to avoid 

direct contact between the detergent and 

the laundry. Detergent with strong bleaching 

power may cause laundry discolouration.

 

Apply the recommended amount of detergent 

as indicated by the detergent maker. Using 

an excessive amount of detergent may leave 

the laundry smelling of detergent residue after 

washing.

Содержание FG1612H1WP


































































Отзывы: