background image

Aria 130c/130/300/600 DECT 
Wireless Terminal (GDC-345H) User Guide                                                       

 

LG-Nortel systems 

 

  

Issue 

2.3

 

wireless terminal and its accessories to keep them in good condition.     
The user is responsible for the result caused by violating the below warnings. 

 

3.1  Wireless Terminal (GDC-345H) 

 

A user should keep the followings to use wireless terminal GDC-345H without any harm to the user 

or to the product.   

 

z

 

Do not expose it to direct sunlight for long period. For operational temperature range, refer to 
the section of ‘

8. Specifications

’. 

z

 

Spilling or being wet may result impossible condition to be repaired.

 

z

 

Do not remove the rubber lid attached on the left side of GDC-345H. The hole on the side part 
is used for ear-microphone and is covered with a rubber lid.

 

z

 

Do not insert any external substance except ear-microphone for GDC-345H in the hole. 
Inserting anything except for ear-microphone provided by LGE may cause severe damage to 
the terminal. 
   

                               
 
 
 
 
 
 
 
 
 
 

z

 

Do not try to disassemble it. Disassembling the terminal may damage it electronically. 

 

z

 

Do not try to alter the external or internal. Trying to alter the terminal may damage severely.

 

z

 

Clean a hand-held type wireless terminal only with a soft and dry cloth. Using soap or any 
other cleansing materials may damage it. 

z

 

Avoid shocks and keep in safe place when it is not used.

 

z

 

Keep it away from any flammable thing or excessive heat. For operational temperature range, 
refer to the section of ‘

8. Specifications

’.

 

z

 

When not used for long period, remove a battery from it and keep separately.

 

z

 

Before initial use, charge fully the battery. 

 
 

Warning 

The ear cap region of this telephone may attract and retain small metal objects.

 

 

3.2  Charger (345H-SSC) 

 

For right use of 345H-SSC, keep the followings: 

LEFT SIDE VIEW

Rubber lid for ear-microphone 

 A ear-microphone is optional. 

Содержание Aria 130


















































































Отзывы: