LG-Ericsson iPECS ES-4526G Скачать руководство пользователя страница 276

Страница: 276 / 1328

HAPTER

| Security Measures

AAA Authorization and Accounting

– 276 –

ES-4500G Series

■

Exec

– Administrative accounting for local console, Telnet, or SSH

connections.

◆

Method Name

– Specifies an accounting method for service requests.

The “default” methods are used for a requested service if no other

methods have been defined. (Range: 1-255 characters)

Note that the method name is only used to describe the accounting

method configured on the specified RADIUS or servers. No

information is sent to the servers about the method to use.

◆

Accounting Notice

– Records user activity from log-in to log-off point.

◆

Server Group Name

- Specifies the accounting server group.

(Range: 1-255 characters)

The group names “radius” and “” specifies all configured

RADIUS and hosts (see

"Configuring Local/Remote Logon

Authentication" on page 269

). Any other group name refers to a server

group configured on the Security > AAA > Server (Configure Group)

page.

Configure Service

◆

Accounting Type

– Specifies the service as 802.1X, Command or Exec

as described in the preceding section.

■

802.1X

■

Method Name

– Specifies a user defined accounting method to

apply to an interface. This method must be defined in the

Configure Method page. (Range: 1-255 characters)

■

Exec

■

Console Method Name

– Specifies a user defined method

name to apply to console connections.

■

Telnet Method Name

– Specifies a user defined method name

to apply to Telnet connections.

Show Information – Summary

◆

Accounting Type

- Displays the accounting service.

◆

Method Name

- Displays the user-defined or default accounting

method.

◆

Server Group Name

- Displays the accounting server group.

◆

Interface

- Displays the port, console or Telnet interface to which

these rules apply. (This field is null if the accounting method and

associated server group has not been assigned to an interface.)

Содержание iPECS ES-4526G

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS ES-4526G

Отзывы:

Похожие инструкции для iPECS ES-4526G

Бренды по названию

Популярные бренды

LG-Ericsson iPECS ES-4526G, Руководство пользователя

Результаты поиска

Содержание iPECS ES-4526G

Отзывы:

Похожие инструкции для iPECS ES-4526G

Бренды по названию

Популярные бренды