LG-Ericsson iPECS ES-4526G Скачать руководство пользователя страница 253

Страница: 253 / 1328

HAPTER

| Quality of Service

Creating QoS Policies

– 253 –

ES-4500G Series

Add Rule

◆

Policy Name

– Name of policy map.

◆

Class Name

– Name of a class map that defines a traffic classification

upon which a policy can act.

◆

Action

– Configures the service provided to ingress traffic. Packets

matching the rule settings for a class map can be remarked as follows:

■

Set CoS

– Sets a priority bits in the VLAN tag for matching packets.

(Range: 0-7)

■

Set IP DSCP

– Configures the service provided to ingress traffic by

setting an IP DSCP value for a matching packet (as specified in rule

settings for a class map. (Range: 0-63)

■

Set IP Precedence

– Configures the service provided to ingress

traffic by setting an IP Precedence value for a matching packet (as

specified in rule settings for a class map. (Range: 0-63)

◆

Meter

– Check this to define the maximum throughput, burst rate, and

the action that results from a policy violation.

◆

Meter Mode

– Selects one of the following policing methods.

■

Flow

(Police Flow) – Defines the committed information rate (CIR,

or maximum throughput), committed burst size (BC, or burst rate),

and the action to take for conforming and non-conforming traffic.

Policing is based on a token bucket, where bucket depth (that is,

the maximum burst before the bucket overflows) is specified by the

“burst” field, and the average rate tokens are removed from the

bucket is by specified by the “rate” option.

■

Committed Information Rate

(CIR) – Rate in kilobits per

second. (Range: 1-1000000 kbps or maximum port speed,

whichever is lower)
The rate cannot exceed the configured interface speed.

■

Committed Burst Size

(BC) – Burst in bytes.

(Range: 64-524288 bytes)
The burst size cannot exceed 16 Mbytes.

■

Conform

– Specifies whether that traffic conforming to the

maximum rate (CIR) will be transmitted without any change to

the DSCP service level, or if the DSCP service level will be

modified.

■

Transmit

– Transmits in-conformance traffic without any

change to the DSCP service level.

Содержание iPECS ES-4526G

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS ES-4526G

Отзывы:

Похожие инструкции для iPECS ES-4526G

Бренды по названию

Популярные бренды

LG-Ericsson iPECS ES-4526G, Руководство пользователя

Результаты поиска

Содержание iPECS ES-4526G

Отзывы:

Похожие инструкции для iPECS ES-4526G

Бренды по названию

Популярные бренды