GDC-450H Wireless Handset
User Guide
24
Note:
The system may take up to 3 minutes to notify the handset of changes to the state of
user features such as DND. A linked station will display “IN USE AT LINK” when the
other linked station is in use; on a call.
5.6 Answering a Call Ringing at Another Station
When another station rings and you may be allowed to answer (pick up) the call. There are
two (2) types of pick-up; directed call pick up answers a call to a specific phone, and group
pick-up answers a call to a group of phones.
To pick up a call for a specific ringing station:
1. Press the
Talk
( ) button, you receive dial tone.
2. Dial the Directed Call Pick-up code, default is 7.
3. Dial the number of the ringing station.
To answer a call to a group of ringing stations:
1. Press the
Talk
( ) button, you receive dial tone.
2. Dial the Group Call Pick-up code. Refer to your System Administrator or, perhaps the
Attendant for the dial code.
Note:
In certain situations such as private line calls, callbacks, etc., you will not be permitted to
pick up a ringing call.
5.7 Using Station Speed Dialing
In addition to the Phonebook numbers, the host system provides memory for additional
Speed dial numbers. Once stored these numbers can be accessed and dialed. Each of the
Station Speed dial numbers can be up to 24 digits in length and may include special
instructions including:
‘*’ as 1st digit
Activate Display Security, do not display number.
Flash as 1st digit
Activate dial-tone detect.
‘#’
Insert
a
pause
dialing
command.
‘*’ not 1st digit
Switch from Pulse to DTMF dialing.
[msg/callbk]
Send as ISDN Keypad Facility IE.
[hold]
Insert
a
Pulse
to
tone
switch-over
To store a Station Speed dial number:
1. Press the
Talk
( ) button, you receive dial tone.
2. Press and hold, 1 second, the
Speed/Program
( ) button.
3. Press the
Speed/Program
( ) button.
4. Dial the Speed dial bin location (may be obtained from System Administrator).
5. Dial the CO Access code (may be obtained from System Administrator).
6. Press and hold, 1 second, the
Speed/Program
( ) button.
7. Dial the phone number to store.
8. Press and hold, 1 second, the
Speed/Program
( ) button.
9. If desired enter a name to associate with the number. Refer to the “Programming a
Name into Display’ section earlier in the guide.
10. Press and hold, 1 second, the
Speed/Program
( ) button.
11. Press the
End
( ) button.
Repeat the above procedure to store additional Speed dial numbers.
Содержание GDC-450H
