LG-Ericsson GDC-450H, Руководство пользователя

Страница: 30 / 66

GDC-450H Wireless Handset
User Guide
17
3.5 Releasing a Call
While on an active call, incoming or outgoing, you may release the call at any time.
To release a call:
1. Press the
End
( ) button. The wireless terminal ends the call and returns to
an idle state.
3.6 Answering a Call
When a call is received, you receive a visual indication of the incoming call. The Call type
icon flashes EXT or INT indicating an external or internal call and the calling number is
shown. If the number is stored in the local Phonebook, the associated name is displayed. In
addition to the visual indication, you receive either an audible ring or the phone vibrates
based on handset set-up selection (refer to incoming call alert setting). You may answer or
reject the call; both will terminate the incoming call signals at the handset.
To answer an incoming call:
1. Handset rings, the Call type icon flashes and Caller ID is displayed (if available).
2. Press
Talk
( ) button to answer a call; the phone icon ( ) and the Call type
display.

Note:
If the handset is in the Charger/base, lifting the handset out of the charger automatically
answers an incoming call.
To reject the incoming call and stop the incoming call signal:
1. Press the
End
( ) button, all signaling stops, but the caller hears ring-back
tone.
3.7 Placing a Call on Hold
While you are on a call using the GDC-450H, you may place the caller in a waiting state
where the caller hears music on hold. This allows you to place another call or answer a call
waiting.
To place a call on hold:
1. Press and hold, 1 second, the right arrow on the
Navigation
( ) button. The call
is placed on hold and other party receives audio from the System music source. The
User’s GDC-450H receives dial tone form the system.

Note:
If a second call is waiting, the above procedure automatically connects the waiting call.
To place another call:
1. Press the
End
( ) button; the wireless terminal returns to an idle state.
2. Place second call in the normal manner.
To retrieve the held call:
1. Press and hold, 1 second, the right arrow on the
Navigation
( ) button; the held
call is re-connected.