LG-Ericsson GDC-400H, Руководство пользователя

Страница: 56 / 64

GDC-400H Wireless Handset
User Guide
43
4. Press the End ( ) button.
6.5.9 Edit CO Code
The GDC-400H can subscribe to four (4) DECT zones simultaneously. Each zone may have access to a
different set of external lines with different codes. The code is used to place calls from the handset
Phonebook as well as for incoming call look-up in the Phonebook. If desired, you can assign a CO access
code the handset will send and receive in front of a Phonebook number for each separate zone. For proper
operation of the Phonebook, your general CO line code should be used (ex., ‘9’ or ‘0’). Each of the four CO
access codes is assigned to each of the subscribed systems; CO Code 1 is for Base (zone) 1, CO Code 2 is
for Base (zone) 2, etc. If a code is not entered, it must be entered as the first digit(s) of the telephone
number in the Phonebook.
To assign a CO Code:
1. Select the Phone Setting menu from the User Menu.
2. Use the Navigation ( ) button to highlight the CO Code selection.
3. Press the OK ( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the Navigation ( ) button to select the code.
•
Code 1- code for Zone 1
•
Code 2 – code for Zone 2
•
Code 3 – code for Zone 4
•
Code 4 – code for Zone 4
5. Press the OK ( ) left soft button to select the code number.
6. Use the dial pad to enter a CO access code (may be provided by System Administrator).
7. Press the OK ( ) left soft button to store the setting.
8. Press the End ( ) button.
6.5.10 Missed Call Mode
The missed call log is maintained by the handset. In cases where the host system alerts multiple phones
including your wireless handset and another phone answers, the handset registers a missed call. This may
lead to a near constant display of “xx missed calls”. You can enable or disable the display of this missed call
message.
To enable or disable the missed call message;
1. Select the Phone Setting menu from the User Menu.
2. Use the Navigation ( ) button to highlight the Missed Call selection.
3. Press the OK ( ) left soft button to access the sub-menu.
4. Use the left or right arrow of the Navigation ( ) button to select Yes or No.
5. Press the OK ( ) left soft button to accept the date.
6. Press the End ( ) button.
6.5.11 Range Out beep
When out-of-range for more than a minute, the phone will beep every 3 seconds. If you expect to be Out-
Of-Range for an extended period you should turn the handset power OFF. If, for example, you leave the
office with the handset on, the Out-Of-Range beep alerts you to turn the handset power OFF.
To disable the Out-Of-Range beep:
1. Select the Phone Setting menu from the User Menu.
2. Use the Navigation ( ) button to highlight the Range Out beep selection.
3. Press the OK ( ) left soft button to access the sub-menu.