LG-Ericsson GDC-400H, Руководство пользователя

Страница: 22 / 64

GDC-400H Wireless Handset
User Guide
9
Use only the adapter provided with the unit. Use of a different adapter could damage the unit or
cause a fire and will invalidate your warranty.
2.4 Installing the Belt Clip
The GDC-400H comes with a belt clip that can be installed on the unit. To install the belt clip, refer to the
figure and instructions below.
1. From the back of the unit, place the belt clip on the left side of the unit at an angle of about 90
o
.
2. Rotate the belt clip over the back of the unit until it fully engages with the unit
2.5 Installation of Wireless Terminal
Before using the GDC-400H, the wireless terminal must be subscribed to a System. The subscription
process must be conducted at the User Station, and at the Attendant Station to ensure proper function of the
wireless terminal. Proper Authorization Codes should be obtained from the System Administrator or the
Attendant before processing the subscription (refer to Subscribing the GCD-400H to a System).
The wireless terminal is allowed to be subscribed to up to 4 GAP systems. If a user wants to subscribe to
more than 4 systems, the wireless terminal first should be unsubscribed from one of the systems. This
subscription procedure can be performed by a User. There are two methods to unsubscribe the wireless
terminal from the key system:
 The User can unsubscribe from the system and the wireless terminal at the same time (details
described in Terminating a Subscription ) .