3.
Connect the network cable to the network port.
4.
Push the grommet into the cable entry.
4.6.2
Connecting charging cables
1.
Feed a pair of charging cables through each of the grommets and then through each of
the cable entries
2.
Connect the charging cables to the terminal block.
a) Open the terminal cover plate, which is placed over the terminal block to protect it.
b) Connect the negative cable (−) to the terminal on the left, GND to the terminal on
the middle and the positive cable (+) to the one on the right. Tighten the cross socket
screws to a torque of 6 N·m.
c) Close the cover
3.
Push the grommets into the cable entries.
