LG Chem RESU10H StorEdge, Руководство по установке

Страница: 23 / 36

23
4. Tighten the two hex-socket screws
enclosed and remove the lift handles.
The nuts for these screws are welded
to the battery pack chassis. Tighten
to a torque of 5 N
•
m using the M6
torque wrench.
5. Press the two buttons and pull the
two latches (marked position) on
the rear side of the wiring box cover
(hinged door).
Wiring box cover
6. Open the wiring box cover (about
2~10 degrees), and pull to remove it.
CAUTION
The wiring box cover is heavy.
[approx. 1.6kg(3.5lb)] If dropped it
may cause injury.
Installation