24
Utility Table Installation
A.
Slide legs into the apron corner pockets. Make sure the legs are pushed up into the corner openings.
Tighten the bolt in all four corners to lock the legs in place.
B.
Move apron and legs (
i.e.
, the utility table) into position in the laboratory.
C.
Level the top of the apron with the top of the adjoining cabinetry. Adjust the leveling glides as needed.
Use fasteners (
e.g.
, sheet metal screws, bolts)
to secure the apron to the adjoining cabinetry through the
sides of the apron.
D.
Position the table stretcher between the legs, laying the stretcher on top of the legs (tubular cross
members) at each end. Screw down the table stretcher from the top, through the obround slots in the
stretcher into the legs.
Step A: Slide legs into apron corner pockets.
Step B: Move aprons and legs into position.
Steps C & D: Level apron and secure to adjoining cabinets; tighten
the bolts to lock the legs in place .
Step D: Position and secure the table stretcher.
