LFA RTP 9 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 95

background image

3

Important Safety Information

READ THIS BEFORE OPERATING MACHINE

Intended Use

The intended use of this machine is to press dry
raw materials into tablet form.
Potential misuse of this machine includes:
•  Applying too much force to the powder.
•  Trying to fill the Die with powder by hand.
•  Inserting Tooling that is too big for the

machine.

• Not properly mounting the machine.
• Using powders that could explode under

pressure.

• Using wet or damp material.

Personal Protection

For personal protection while transporting the
RTP 9®, abide by these actions:
•  Use an engine hoist to lift the machine.
•  Wear steel toe boots to prevent foot injury.
•  Wear heavy duty grip gloves to ensure firm

grasp on machine.

• Wear back support belt to prevent injury if

needed.

For personal protection while operating the
RTP 9®, abide by these actions:
• Avoid wearing loose jewelry to prevent

machine entanglement.

• Contain long hair to prevent machine

entanglement.

•  Wear safety goggles.
•  Wear disposable latex/rubber gloves.
•  Wear a hairnet (food grade products only).
•  Wear a beard net if needed (food grade

products only).

General Hazards

In the case of an emergency during
operation, immediately push the Emergency
Stop button or turn the Emergency Shut-Off
Switch.

• Be aware of risk of entanglement and pinch

point due to moving parts.

• Do not operate in a wet environment or with

wet hands due to risk of electrical shock or
burn.

• Do not operate if any wires are damaged,

pinched, or frayed due to risk of electrical
shock or burn.

•  Keep out of reach of children.
•  Keep fingers away from all moving parts.
•  Ensure that machine is secure with anti-

vibration feet on the workspace floor.

• Inspect machine before use.
• Check that nuts and bolts are suitably

tightened.

• Use this machine only for its intended use

as described in this manual.

• Do not modify the machine in any way.
• Turn off and unplug the machine before

conducting cleaning and maintenance.

«
1
2
3
4
5
...
»

Содержание RTP 9
































































































Отзывы:

Нет отзывов

Похожие инструкции для RTP 9

Бренд: XAG Страницы: 24

Бренд: Xebex Fitness Страницы: 15

Бренд: qeedo Страницы: 2

Бренд: PAS Systems International Страницы: 24

MARK V Alcovisor

Бренд: PAS Systems International Страницы: 20

Бренд: PARRY Страницы: 14

Бренд: York Fitness Страницы: 36

Бренд: Valmar Страницы: 78

Бренд: Valhalla Scientific Страницы: 64

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 5

Бренд: neofeu Страницы: 28

Бренд: ubicquia Страницы: 4

CIRCOLINA G10q T9

Бренд: Life Страницы: 2

Aristo WeldCloud Mig U5000i

Бренд: ESAB Страницы: 28

Бренд: Kamar Страницы: 2

Бренд: Veit Brisay Страницы: 18

Бренд: Life Fitness Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды