manualshive.com logo in svg

LFA RTP 23 Euro, Руководство пользователя, Страница: 50 / 64

Поделиться
Скачать
LFA RTP 23 Euro Скачать руководство пользователя страница 50

50

Clean the Parts

6. Take one of the parts removed by the machine and bring it to the bowl of soapy water.
 

6.1 Note: To ensure that all dirt and debris are removed, wash one part at a time.

7. Take a clean cloth and carefully wash the part thoroughly.
8. Dry part immediately after it is cleaned and rinsed.
9. Sanitize part with a clean cloth.
10. Lubricate part.
11. Repeat steps 6-10 for each remaining part until they are all clean.

Note: Before washing the Turret, LFA recommends using our Die 
Seat Cleaner. You can order the Die Seat Cleaner and Insertion 
Ring on our website at 

https://www.lfatabletpresses.com/die-seat-

cleaner-insertion-ring

Clean the Base

12. Spray the RTP 41

®

 base with the cleaner, particularly in the Tooling's location.

13. Rinse the cleaner off with potable water and dry the base immediately after.
 

13.1 Note: Ensure that the machine's base is completely dry.

14. Sanitize the RTP 41

®

 base with a clean cloth.

15. Lubricate the RTP 41

®

 base.

Содержание RTP 23 Euro

































































Отзывы:

Нет отзывов