26
Upper Roller Cam Penetration Adjustment
The Upper Punches' penetration can be adjusted by moving the Upper Roller Cam up or down. This
could be done in response to capping in tablets or excessive ejection forces.
Tools and Materials Needed
• Wrench set
• Crosshead screwdriver
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
1. Raise each of the Perspex Casing's doors and lock them into an upward position.
2. Take off the Upper Roller Cam's cover with a crosshead screwdriver.
3. Loosen the Upper Roller Cam's bolt with a wrench.
WARNING:
To prevent any potential personal injury, unplug the RTP 10i® from
the electrical outlet.
4. Rotate the Upper Roller Cam to adjust the punch peneteration.
4.1 Note: Rotate clockwise to increase punch penetration and counterclockwise to decrease
punch penetration.
