20
Force Feeder Height
The size of granules in your powder can affect how smoothly dry materials are moved through the
Force Feeder, which can affect how much powder is wasted. Sometimes this requires the Force
Feeder's height to be adjusted.
To watch a video of Force Feeder calibration, go to
https://www.lfatabletpresses.com/rtp10i-force-
feeder-calibration
Tools and Materials Needed
• Set of metric Allen keys
• Feeler gauge
• Wrench set
• Level
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
1. Raise each of the Perspex Casing's doors and lock them into an upward position.
2. Unscrew the Powder Shutoff Gate's bolt by hand and remove the Hopper and the Hopper to
Force Feeder Connecting Pipe from the RTP 10i®.
3. Loosen the Force Feeder's 17 mm bolts with a wrench and remove them.
4. Remove the Force Feeder from the RTP 10i®.
WARNING:
To prevent any potential personal injury, unplug the RTP 10i® from
the electrical outlet.
