LF 1627012 Скачать руководство пользователя страница 11

11

WIRING

Connect all GROUND (GREEN) wires from fan (on 
downrod (A), if applicable, and mounting bracket (C)) 
to BARE/GREEN supply wire from ceiling.
 
Connect BLACK wire (labeled AC IN L) from remote 
control receiver (R) to BLACK supply wire from 
ceiling.
 
Connect WHITE wire (labeled AC IN N) from remote 
control receiver (R) to WHITE supply wire from 
ceiling.
 
Connect WHITE wire (labeled TO MOTOR N) from 
remote control receiver (R) to WHITE wire from motor 
housing (D).
 
Connect BLACK wire (labeled TO MOTOR L) from 
remote control receiver (R) to BLACK wire from motor 
housing (D).
 
Connect BLUE wire (labeled FOR LIGHT) from 
remote control receiver (O) to BLUE wire from motor 
housing (D).

Hardware Used

Wire Connector

x 6

AA

      

WARNING:

 To reduce the risk of fire, electrical shock or personal injury, wire connectors provided 

with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If 
your house wire is larger than 12-gauge or there is more than one house wire to connect to the 
corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

      

CAUTION:

 Be sure outlet box is properly grounded and that a ground (green or bare) wire is 

present.

      

WARNING:

 If house wires are different colors than referred to in the following steps, stop 

immediately. A professional electrician is recommended to determine wiring.

      

WARNING:

 Using a full range dimmer switch (not included) to control fan speed will cause a loud 

humming noise from fan. To reduce the risk of fire or electrical shock, do NOT use a full range dimmer 
switch to control fan speed.

 1.  Make the necessary wiring connections for remote 

control operation as detailed 

below

 and in the 

drawing in Fig. 1. For each wire connection, use 
one of the wire connectors (AA), making sure to 
screw wire connector (AA) on in a clockwise 
direction.
 

      CAUTION:

 Assistance from another person is 

recommended for this step.

R

1

WHITE SUPPLY WIRE

BLACK SUPPLY WIRE

BLACK

BLACK

WHITE

BLUE

BLUE

WHITE

BLACK

AC IN L

WHITE

AC IN N

WHITE

GROUND (GREEN OR BARE)

GROUND 

(GREEN OR BARE)

BLACK

FROM

RECEIVER

FROM 

FAN

FROM

RECEIVER

FROM

CEILING

AA

AA

A

C

Содержание 1627012







































Отзывы: