LEYBOLD ECODRY plus 25, Руководство по эксплуатации

Страница: 18 / 64

4 Installation
CAUTION: SAFETY INSTRUCTIONS
Follow all safety instructions and take note of all appropriate precautions.
WARNING: BLOCKED EXHAUST PIPELINE
Risk of damage to equipment. Make sure the exhaust pipeline is not blocked. If an
exhaust isolation valve is used, make sure that the pump is not operated with the
valve closed.
Possible hazards on the dry pumping system include electricity, process
chemicals, and Fomblin® (PFPE) oil:
▪ Contact us or the local service centre for more information for advice
or assistance on installation.
▪ Do not remove the temporary covers from the system inlet and
exhaust until ready to connect.
▪ Do not operate the system unless the inlet and exhaust are connected
to the vacuum and exhaust extraction system.
▪ Isolate the other components in the process system from the electrical
supply to prevent accidental operation.
▪ Electrical supplies are potentially hazardous energy sources. Lockout
and tagout before you do the maintenance.
▪ Obey all national and local rules and safety regulations when you install
the system.
▪ Tighten the cables, hoses and pipework during installation to prevent a
trip hazard.
▪ Make sure that the installation area is clean and free from debris and
contamination before you install the pump.
▪ Make sure that all facilities given in this manual are available for the
system to perform correctly.
4.1 Unpack and inspect
WARNING: DAMAGED PUMP
Risk of injury to people or damage to equipment. Do not use the pump if it is
damaged. Failure to do so can result in injury to people and/or damage to equipment.
CAUTION: PUMP LIFE
Risk of damage to equipment. Unpack the pump carefully and avoid excessive shock
to the pump. Excessive shock will damage the bearings and reduce the life of the
pump.
Refer to Table: Mechanical data for the mass of the pump.
The pump is supplied in recyclable packaging.
1. Open the cardboard box from the top.
300902516_002 - 10/2020 - © Leybold
18
Installation