background image

APPENDIX 

 

270727EI.DOCX

17200295_002_C0/2016 - © Leybold 

35/40

 

12 

Appendix 

12.1 

Safety information on contamination 

Aim and purpose 

 
Each entrepreneur (operating company) is responsible for the health and safety of its 
employees. The responsibility extends to external personnel carrying out repairs on the site 
of the operating company and to personnel of contractors. 
 
The enclosed declaration shall inform contractors about contamination of compressors, 
vacuum pumps and vacuum components returned for repair. Due to this information, the 
contractor is capable of taking the necessary safety precautions when carrying out repairs. 

 

 

 

The same regulations apply for 

on-site repairs

 
 

Preparation for dispatch 

 
Before dispatching the product the operating company must fill out the declaration as per 
chapter «12.2 Declaration of chemical contamination» and enclose it to the shipping 
documents. The shipping instructions stated in the relevant user manual must be observed. 
 
For example: 

  Drain all service fluids 

  Remove filter elements, where applicable 

  Close all openings airtight 

  Pack products appropriately 

  Dispatch products in suitable transport containers 

 

 

 

Attach declaration on contamination to the 

outside

 of the transport container. 

 
 

Содержание 215130









































Отзывы: