Leyard Tocuhboards Planar UltraRes Series Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 88

background image

Planar UltraRes Series User Manual

62

Using the Touch Screen

You can use the touch screen to control your Windows, Mac, or Linux operating
system. The Planar UltraRes Series is HID compliant, delivering up to 12 points of
touch on both Windows and Linux without a driver. To achieve greater than 12 points
of touch on a Planar UltraRes Touch display, a driver will need to be installed on the
operating system. Drivers for Windows and Linux can be found on

http://www.planar.com/support

and on the USB flash drive included with the display.

Single touch only is supported for Mac operating systems. There is no driver required
to enable Mac support.

Note:

Ensure that you have installed the USB cable on the display to a computer.

Note:

If an OPS PC is installed in the OPS slot, the OPS PC will automatically be connected

internally to the touch system. The touch functionality is configurable via the Touch Control
setting.

Touchscreen MultiTouch Driver Installation

1

With the PC on, plug in the USB memory stick to the USB port on your PC.

2

Locate and open the USB drive.

3

Double-click on the “mt_driver_kit [xxxxxx].exe” to install the driver.

4

Follow installation prompts until driver installation is complete.

Once driver installation is complete, the touchscreen is ready for use.

Touchscreen (PQLabs) MultiTouch Platform Content

The PQLabs Software is used for troubleshooting and calibration. The different
menus are described below.

1

On the PC, select the

Start

menu,

All Programs

and then

PQLabs Software

.

2

Click on “MultiTouch Platform” to open the PQLabs MultiTouch Platform window.

Touchscreen Information

• Serial Number: Displays the serial number of the connected touchscreen.

• Firmware Version: Displays the firmware version of the touchscreen selected

under the “Serial Number” dropdown menu.

• Touch Points: Displays the number of touch points for which the touchscreen is

capable.

• Status: Displays the current status of the touchscreen.

«
...
64
65
66
67
68
...
»

Содержание Tocuhboards Planar UltraRes Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для Tocuhboards Planar UltraRes Series

Бренд: iGPSPORT Страницы: 5

Бренд: iHealth Страницы: 92

Бренд: Acer Страницы: 14

SyncMaster 933SN

Бренд: Samsung Страницы: 59

Бренд: AOC Страницы: 55

Бренд: Beurer Страницы: 112

Бренд: Luvion Страницы: 36

Бренд: nubeca Страницы: 14

HAP-19AV Series

Бренд: I-Tech Страницы: 28

Бренд: Suzuki Страницы: 338

ColorEdge CG211

Бренд: Eizo Страницы: 71

Бренд: Summer Страницы: 4

Бренд: Graco Страницы: 13

Бренд: OiTEZ Страницы: 24

IndraControl VDP 16.3

Бренд: REXROTH Страницы: 60

Бренд: GoWISE USA Страницы: 18

Бренд: Sportline Страницы: 16

Бренд: QSC Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды