Lexus NX 200, Руководство пользователя

Страница: 131 / 514

130
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
3-2. Opening, closing and locking the doors
● Even if the electronic key is not inside the
vehicle, it may be possible to start the
engine if the electronic key is near the
window.
●
The doors may unlock if a large amount
of water splashes on the door handle,
such as in the rain or in a car wash when
the electronic key is within the effective
range. (The door will automatically be
locked after approximately 30 seconds if
the doors are not opened and closed.)
●
If the wireless remote control is used to
lock the doors when the electronic key is
near the vehicle, there is a possibility that
the door may not be unlocked by the
entry function. (Use the wireless remote
control to unlock the doors.)
●
Touching the door lock sensor while
wearing gloves may delay or prevent lock
operation. Remove the gloves and touch
the lock sensor again.
●
Except for AGZ10L-AWTLTW,
AGZ15L-AWTLTW and ZGZ10L-
AWXLPW models
*
: When the lock
operation is performed using the lock
sensor, recognition signals will be shown
up to two consecutive times. After this, no
recognition signals will be given.
*
: The model code is indicated on the man-
ufacturer’s label or the Certification Reg-
ulation label. (

P.470)
●
If the door handle becomes wet while the
electronic key is within the effective
range, the door may lock and unlock
repeatedly. In that case, follow the follow-
ing correction procedures to wash the
vehicle:
• Place the electronic key in a location 2 m
(6 ft.) or more away from the vehicle.
(Take care to ensure that the key is not
stolen.)
• Set the electronic key to battery-saving
mode to disable the smart entry & start
system. (

P.129)
●
If the electronic key is inside the vehicle
and a door handle becomes wet during a
car wash, a message may be shown on
the multi-information display and a
buzzer will sound outside the vehicle. To
turn off the alarm, lock all the doors.
●
The lock sensor may not work properly if
it comes into contact with ice, snow, mud,
etc. Clean the lock sensor and attempt to
operate it again.
●
A sudden approach to the effective
range or door handle may prevent the
doors from being unlocked. In this case,
return the door handle to the original
position and check that the doors unlock
before pulling the door handle again.
●
If there is another electronic key in the
detection area, it may take slightly longer
to unlock the doors after the door handle
is gripped.
■ When the vehicle is not driven for
extended periods
● To prevent theft of the vehicle, do not
leave the electronic key within 2 m (6 ft.)
of the vehicle.
● The smart entry & start system can be
deactivated in advance. (

P.482)
■
To operate the system properly
Make sure to carry the electronic key when
operating the system. Do not get the elec-
tronic key too close to the vehicle when
operating the system from the outside of the
vehicle.
Depending on the position and holding
condition of the electronic key, the key may
not be detected correctly and the system
may not operate properly. (The alarm may
go off accidentally, or the door lock preven-
tion may not operate.)
■ If the smart entry & start system does
not operate properly
● Locking and unlocking the doors: Use
the mechanical key. (

P.458)
● Starting the engine:

P.459
■
Customization
Settings (e.g. smart entry & start system)
can be changed.
(Customizable features:

P.482)
If the smart entry & start system has been
deactivated in a customized setting, refer to
the explanations for the following opera-