manualshive.com logo in svg

Lexus LX 470, Руководство пользователя

Поделиться
Скачать
Lexus LX 470 Скачать руководство пользователя страница 355

BODY

339

Plastic wheel ornaments:  The plastic wheel ornaments are
damaged easily by organic substances.  If any organic
substance splashes an ornament, be sure to wash it off with
water and check if the ornament is damaged.

CAUTION

Do not attach the heavily damaged plastic wheel
ornament.  It may fly off the wheel and cause accidents
while the vehicle is moving.

Aluminum wheels:  Use only a mild soap or neutral detergent.

Urethane bumpers and side moldings:  Wash carefully.  Do
not scrub with abrasive cleaners.  The bumper and side
molding faces are soft.

Road tar:  Remove with turpentine or cleaners that are marked
safe for painted surfaces.

NOTICE

Do not use organic substances (gasoline, kerosene,
benzine or strong solvents), which may be toxic or
cause damage.

3. Rinse thoroughly − dried soap can cause streaking.  In hot
weather you may need to rinse each section right after you
wash it.

4. To prevent water spots, dry the vehicle using a clean soft
cotton towel.  Do not rub or press hard − you might scratch the
paint.

Automatic car wash

NOTICE

To prevent damage to the antenna, make sure it is
retracted before driving your vehicle through an
automatic car wash.

Your vehicle may be washed in an automatic car wash, but
remember that the paint can be scratched by some type of
brushes, unfiltered washing water, or the washing process
itself.  Scratching reduces paint durability and gloss, especially
on darker colors.  The manager of the car wash should be able
to advise you whether the process is safe for the paint on your
vehicle.

Waxing your Lexus

Polishing and waxing is recommended to maintain the
original beauty of your Lexus’ finish.

Once a month or if the vehicle surface does not repel water
well, apply wax.

1. Always wash and dry the vehicle before you begin waxing,
even if you are using a combined cleaner and wax.

2. Use a good quality polish and wax.  If the finish has become
extremely weathered, use a car−cleaning polish, followed by
a separate wax.  Carefully follow the manufacturer ’s
instructions and precautions.  Be sure to polish and wax the
chrome trim as well as the paint.

Содержание LX 470


















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды