manualshive.com logo in svg

Lexus LX 470, Руководство пользователя

Поделиться
Скачать
Lexus LX 470 Скачать руководство пользователя страница 241

STARTING AND DRIVING

225

When your vehicle is loaded heavily or you are driving in an
unpaved road, the mode   3  or   4  will be recommended.  To
provide good vehicle stability, the damping effect will be harder
than for ordinary driving mode.

With the four−wheel drive control lever at ”L”, the damping
effect suitable for off−road driving will be provided.

ACTIVE TRACTION CONTROL

SYSTEM

31X062c

Active traction control system indicator light

The active traction control system automatically helps
control the spinning of 4 wheels which may occur when
accelerating on slippery road surfaces, by controlling the
output of the brake and engine.  Thus, the system assists
driver to control the driving power of 4 wheels.  When you
turn the ignition switch on, the active traction control
system always turns on automatically, and the active
traction control indicator light will come on.  The indicator
light will go off after a few seconds.

When active traction control is applied, the active traction
control system indicator light blinks.

Содержание LX 470


















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды