manualshive.com logo in svg

Lexus LX 470, Руководство пользователя

Поделиться
Скачать
Lexus LX 470 Скачать руководство пользователя страница 30

KEYS AND DOORS

14

Sounding an alarm

11X015a

When you push the ”PANIC” button for about 1 second, an
alarm sounds to deter any person trying to break into or
damage your vehicle.

If you want to stop the alarm, push ”PANIC” button for about 1
second or ”UNLOCK” button.

This function does not work when the ignition key is in the ”ON”
position.

For vehicles sold in U.S.A.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:  (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.

NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.  These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.  This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications.  However, there is no guarantee
that interference will not occur in a particular
installation.  If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV techni-
cian for help.

FCC WARNING:
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

Содержание LX 470


















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды