Lexmark Z2300 Series, Руководство пользователя

Страница: 15 / 54

Make sure:
•
You follow the loading instructions that came with the labels.
•
The print side of the labels faces you.
•
The adhesive on the labels does not extend to within 1 mm of the edge of the label.
•
You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during
printing, resulting in a paper jam.
•
The labels are loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the labels.
Transparencies
Load up to 10 transparencies.
Make sure:
•
The rough side of the transparencies faces you.
•
You don't use transparencies with paper backing sheets.
•
The transparencies are loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the transparencies.
Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink
smudging.
Custom-size paper
Load up to 100 sheets of custom-size paper (depending on the thickness).
Make sure:
•
The total thickness of paper does not exceed 10 mm (0.4 inches).
•
The print side of the paper faces you.
•
The paper size fits within these dimensions:
Width:
–
76–216 mm
–
3.0–8.5 inches
Length:
–
127–432 mm
–
5.0–17.0 inches
•
The paper is loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the paper.
15