Lexmark Z1520 Скачать руководство пользователя страница 95

Страница: 95 / 124

Click

Close

Make sure the new port has been selected on the Ports tab, and then click

Apply

The new port is listed with the printer name.

Click

Restart the host computer and the remote computer

Try printing again.

Printer is not able to communicate with the computer

The printer and computer are not able to exchange data. Verify that the printer is plugged in, and the

light is on.

Wrong printer is attached

The printer attached to the computer is not the correct printer. See the setup documentation for help attaching the
printer.

Printer is out of paper

Load paper.

Press

Updating the printer software

The printer software needs to be updated to run properly.

Start Windows.

When the desktop appears, insert the software CD for Windows.

The installation screen appears.

Click

Install

When the Existing Printer Driver Found dialog box appears, select

Update the existing driver software

Bidirectional communication is not established

The printer and computer may not be able to exchange data.

These are possible solutions. Try one or more of the following:

Make sure there is no problem with the connections

For more information, see “Cable is not connected, is loose, or is damaged” on page 92.

Make sure the printer is receiving power

If the

button is not lit, the printer may not be receiving power.

•

Plug the printer into a different outlet.

•

If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.

Содержание Z1520





























































































































Результаты поиска

Содержание Z1520

Отзывы:

Похожие инструкции для Z1520

Бренды по названию

Популярные бренды

Lexmark Z1520, Руководство пользователя

Результаты поиска

Содержание Z1520

Отзывы:

Похожие инструкции для Z1520

Бренды по названию

Популярные бренды