background image

Statement of limited warranty

121

Notices

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or 
replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for 
which it was designed. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for 
the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

 

The warranty period starts on the date of original purchase and ends 12 months later as shown on the purchase receipt 
provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier 
if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Paper Feed items, and any other 
items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or 
“Scheduled Maintenance” message for such item. 

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your 
product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are 
responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the 
Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not 
included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, 
and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage 
media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, contact on 
the World Wide Web at http://support.lexmark.com. 

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a 
Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

 

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints 
produced by any product.

Warranty service does not include repair of failures caused by:

Modification or unauthorized attachments

Accidents, misuse, abuse or use inconsistent with Lexmark user's guides, manuals, instructions or guidance.

Unsuitable physical or operating environment

Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

Operation of a product beyond the limit of its duty cycle

Use of printing media outside of Lexmark specifications

Modification, refurbishment, repair, refilling or remanufacture of products by a third party, supplies or parts

Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR 
REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR 
IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR 
CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. 
ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO 
THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL 
INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT 
NOTICE.

Limitation of liability

 

Содержание Optra T642n






























































































































Отзывы: