Lexmark Optra T522 Скачать руководство пользователя страница 62

Страница: 62 / 333

Diagnostic Information

2-35

Infoprint 1120 and 1125

Power-On Self Test (POST)

When you turn the printer on, it performs a Power-On Self Test.
Check for correct POST functioning of the base printer by observing
the following:

1. The LED comes on.

2. The operator panel displays one and a half row of pels, and

then clears.

3. Diamonds scroll across the display, and then clear.

4. The operator panel displays one and a half row of pels, and

then clears.

5. The top line of the operator panel displays one square block of

pels that turn on one at a time until all sixteen blocks display
and then they all turn off.

6. “Performing Self Test” appears on the display.

– The high capacity option elevator tray moves to the

uppermost position if installed.

– The duplex unit is checked if installed.

7. “Busy” appears on the display.

8. The fuser lamp turns on. The fuser takes longer to warm up

from a cold start than a warm start.

9. The main fan turns on.

10. The main drive motor turns on.

11. The developer drive assembly drives the developer shaft in the

toner cartridge.

12. The exit rollers turn.

13. The operator panel LED starts blinking.

14. “Ready” appears on the display.

Содержание Optra T522














































































































































































































































































































































Результаты поиска

Содержание Optra T522

Отзывы:

Похожие инструкции для Optra T522

Бренды по названию

Популярные бренды

Lexmark Optra T522, Руководство по обслуживанию

Результаты поиска

Содержание Optra T522

Отзывы:

Похожие инструкции для Optra T522

Бренды по названию

Популярные бренды