Lexmark Optra K 4046 Скачать руководство пользователя | Manualshive

Страница: 2 / 156

background image

Second Edition (October 1998)

The following paragraph does not apply to any country where such provisions are
inconsistent with local law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not
allow disclaimer of express or implied warranties in certain transactions, therefore, this
statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in later
editions. Improvements or changes in the products or the programs described may be
made at any time. Publications are not stocked at the address given below; requests for
publications should be made to your point of purchase.

A form for reader’s comments is provided at the back of this publication. If the form has
been removed, comments may be addressed to Lexmark International, Inc., Department
D22A/035-3, 740 New Circle Road NW, Lexington, Kentucky 40550, U.S.A. Lexmark may
use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you.

Lexmark and Optra are trademarks of Lexmark International, Inc., registered in the United
States and/or other countries.

Other trademarks are the property of their respective owners.

© Copyright Lexmark International, Inc. 1998. All rights reserved.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.

«
1
2
3
4
...
»

Содержание Optra K 4046





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Optra K 4046

Бренд: F+D Feinwerk- und Drucktechnik Страницы: 22

COLOR SYSTEM 110

Бренд: Oce Страницы: 392

Бренд: Oki Страницы: 215

Бренд: Microplex Страницы: 135

Бренд: Oki Страницы: 180

Бренд: Rokit Страницы: 16

Бренд: Lanier Страницы: 234

Pro-LX Pro-LX Laminating Card...

Бренд: FARGO electronics Страницы: 228

Бренд: iDPRT Страницы: 74

Бренд: Memjet Страницы: 181

Бренд: Oki Страницы: 187

Бренд: Citizen Страницы: 57

Бренд: Xerox Страницы: 3

Бренд: 3nStar Страницы: 8

Бренд: DPM Страницы: 2

Бренд: Xerox Страницы: 244

Бренд: Oki Страницы: 174

Duplicator 7 Plus

Бренд: WANHAO Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды