Lexmark Optra Color 45 Скачать руководство пользователя

Страница: 19 / 122

General Information

1-7

4080-001

Printing the Menu Settings Page

The menu settings page shows current settings for the menus and a
list of installed options. You can use this page to verify that the
printer options are properly installed and the printer settings are
properly set.

Note: Before printing the menu settings page, make sure the Paper
Type setting for the source is Plain Paper.

To print a menu settings page:

1. Make sure the printer is plugged in and the

Ready

status

message appears on the display.

2. Press Menu> or <Menu to enter the menus.

3. Continue to press and release Menu> until you see

Tests Menu.

4. Press Select.

Tests Menu

appears on the first line and

Print Menus

is on

the second line.

5. Press Select to select

Print Menus.

The message Printing Menu Settings

appears and remains on

the operator panel display until the page prints. The printer
returns to the Ready

tate after the menu settings page prints

6. If you installed options, verify that they are listed on the menu

settings page under “Installed Features.” If an option you
installed does not appear on the page, unplug the power cord
and reinstall the option.

Содержание Optra Color 45



























































































































Результаты поиска

Содержание Optra Color 45

Отзывы:

Похожие инструкции для Optra Color 45

Бренды по названию

Популярные бренды

Lexmark Optra Color 45, Руководство по обслуживанию

Результаты поиска

Содержание Optra Color 45

Отзывы:

Похожие инструкции для Optra Color 45

Бренды по названию

Популярные бренды