Lexmark Optra Color 1200, Руководство по обслуживанию

Страница: 60 / 245

Diagnostic Information
2-21
5050-001
84 Color PC Life
Warning This message alerts you that you can print
approximately 100 pages before the
Color PC Drums
Exhausted
message appears. If you do not have new
color photoconductors, order them now.
The cyan, magenta, and yellow photoconductors come
packaged together. You cannot order them separately.
Press
Go
to clear the message and continue printing.
The
Supplies
status message is then displayed with
the
Ready
,
Power Saver
,
Busy
and
Waiting
messages—unless another status message of higher
priority is posted—until you replace the
photoconductor.
If this message does not reset after replacing all
photoconductor units, clean or replace the drum
sensor (11G0548) in the right sub frame.
84 Black PC Drum
Exhausted The black photoconductor has reached the end of its
13,000-page life. You may want to replace the
photoconductor now.
If the print quality is still acceptable, press Go to clear
the message and continue printing. The Supplies
status message is then displayed with the Ready ,
Power Saver , Busy and Waiting messages—unless
another status message of higher priority is posted—
until you replace the photoconductor.
When you replace the black photoconductor, make
sure you also install the new fuser coating roll that is
included in the black photoconductor kit.
If this message does not reset after replacing all
photoconductor units, clean or replace the drum
sensor (11G0550) in the right sub frame.
Message Action