Lexmark Optra Color 1200, Руководство по обслуживанию

Страница: 50 / 245

Diagnostic Information
2-11
5050-001
Ready Hex Hex Trace diagnostic mode is active, and the printer is
ready to receive data. Use Hex Trace to isolate the
source of a print job problem. With Hex Trace selected,
all data sent to the printer is printed in hexadecimal
and character representation. Control code strings are
printed, not executed.
To exit Hex Trace mode, turn the printer off or reset the
printer. To reset the printer, press
Menu>
or
<Menu
.
The Job Menu is displayed and Reset Printer appears
on the second line. Press
Select
.
Locking Menus Someone has locked the menus. While the menus are
locked, users cannot change the printer default
settings from the operator panel.
Unlocking Menus Someone has unlocked the menus. Users can now
change the printer default settings from the operator
panel.
Menus Disabled Menus have been locked, or disabled. To unlock, press
the Stop and Go buttons as you POR the machine.
Supplies At least one of the printer supplies needs attention.
You may have a paper tray that is low on paper or a
toner cartridge or photoconductor that needs
replacing. Press
Menu>
or
<Menu
to open the
Supplies Menu.
Maintenance It’s time to replace the fuser, transport belt, and roller
set. See the Preventive Maintenance chapter for more
information.
Parallel The standard parallel interface is the active
communication link.
Parallel
x
The specified parallel interface is the active
communication link.
Serial x The specified serial interface is the active
communication link.
Network
x
The specified network interface is the active
communication link.
LocalTalk x The LocalTalk interface is the active communication
link.
Infrared
x
The infrared interface is the active communication link.
Fax The Fax interface is the active communication link.
Message Meaning