Ordering and replacing supplies
Ordering ink cartridges
Order the cartridges that are designed for use in your region.
•
Region 1
: For the United States, Canada, and Latin America, use 200, 200XL, or 200XLA cartridges.
•
Region 2
: For the European Union (EU), the European Economic Area (EEA), and Switzerland, use 210,
210XL, or 200XLA cartridges.
•
Region 3
: For Africa, the Middle East, Central Eastern Europe (non
‑
EU), the Commonwealth of
Independent States (CIS), and the Asia Pacific region, use 220, 220XL, or 200XLA cartridges.
1
Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or
recycling. For more information, visit
www.lexmark.com/regions
.
2
Available only on the Lexmark Web site at
www.lexmark.com
.
Notes:
•
To get more ink, order high
‑
yield ink cartridges.
•
Depending on your country or region, you may get the ink cartridges individually or in packs.
•
You can order a mix of standard ink cartridges and high
‑
yield ink cartridges, depending on your
needs.
•
For page yield information, visit
www.lexmark.com/yields
.
•
The cartridges used for printing documents can also be used for printing photos.
•
For best results, use only genuine Lexmark ink cartridges.
Replacing ink cartridges
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges
immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
1
Turn on your printer.
2
Open the ink cartridge access door.
1
SD/MS/xD/MMC
2
Warning—Potential Damage:
Do not extend the ink cartridge access door beyond 90 degrees
when opening to prevent it from breaking.
3
Press the release tab, and then remove the used ink cartridge or cartridges.
4
Insert each ink cartridge until it
clicks
into place.
SD/MS/xD/MMC
Note:
Install the new ink cartridges immediately after removing them from the packaging to avoid
exposing the ink to air.
Ordering and replacing supplies
17
