Lexmark CS410 series, Руководство пользователя

Страница: 155 / 210

Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, select Continue to continue printing. For non
‑
touch
‑
screen printer
models, press to confirm.
•
Turn off the printer and then turn it back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark
support Web site at
http://support.lexmark.com .
Standard USB port disabled [56]
From the printer control panel, select Continue to clear the message. For non
‑
touch
‑
screen printer models,
press to confirm.
Notes:
•
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu is not set to Disabled.
Supply needed to complete job
Try one or more of the following:
•
From the printer control panel, touch Prompt for supplies to view all error messages that indicate what
supplies are needed to continue processing the current job. For non
‑
touch
‑
screen printer models, press
to clear the message and continue printing.
1
Order the missing supply immediately.
2
Install the supply. For more information, see the instruction sheet that came with the supply.
•
Cancel the print job, then install the missing supply, and then resend the print job.
Too many flash options installed [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra flash memory.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
Too many trays attached [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
Troubleshooting 155