Lexmark C 540n, Руководство по обслуживанию

Страница: 93 / 262

Diagnostic aids
3-3
5025-2xx, 4xx
Base Sensor Test
Front Door See “Base Sensor Test” on page 3-16 .
S1
S2
Fuser exit Sensr
Standard Bin
C-TMC Sensor
M-TMC Sensor
Y-TMC Sensor
K-TMC Sensor
Input
MISC TESTS
Motor Detect See “Motor Detect” on page 3-17 .
DEVICE TESTS
Flash Test (if flash memory is
installed) See “Flash Test” on page 3-17 .
Printer Setup
Defaults See “Defaults” on page 3-18 .
Prt Color Pg Count See “Page counts” on page 3-18 .
Prt Mono Pg Count
Perm Page Count
Serial Number See “Serial Number” on page 3-18 .
Engine Setting 1 See “Engine Setting 1 through 4” on page 3-18 .
Engine Setting 2
Engine Setting 3
Engine Setting 4
Model Name See “Model Name” on page 3-18 .
Config ID (Configuration ID) See “Configuration ID” on page 3-19 .
ITU Barcode See “ITU Barcode” on page 3-19 .
Reset Fuser Cnt See “Reset Fuser Cnt” on page 3-20 .
EP Setup
EP Defaults See “EP Defaults” on page 3-20 .
Fuser Temp See “Fuser Temperature” on page 3-20 .
DC Charge Adjust See “DC Charge Adjust, Dev Bias Adj, Transfer Adjust” on page 3-20 .
Dev Bias Adjust
Transfer Adjust
TPS Setup
Right See “Right or Left TPS” on page 3-21 .
Left
Cal Ref Adjust See “Cal Ref Adj” on page 3-21 .
Reset Color Calibration See “Reset Color Cal” on page 3-21 .
Reports
Menu Settings Page See “Menu Settings Page” on page 3-22 .
Diagnostics Menu (continued)