Lexmark 7003-050 X340n, Руководство по обслуживанию

Страница: 32 / 162

Diagnostic information
2-11
7003-XXX
34 Short Paper
The MFP determines the paper length is too short to print the formatted data.
This occurs when the MFP does not know the actual paper size loaded in the
tray. Make sure the Paper Size setting is correct for the size paper that is being
used.
The following actions may be taken:
Press or Start to clear the message and continue printing.
Press Stop to cancel the job.
37 Insufficient
Collation Area This message displays when the MFP memory is insufficient to collate the
pages of the print job.
Press or Start to clear the message.
Press Stop to cancel the job.
38 Memory Full
This message displays when the MFP is processing an incoming job and there
is insufficient memory available to continue processing the job. The following
actions may be taken:
• Press or Start to clear the message and continue printing.
• Press Stop to cancel the print job.
Clearing the error this way may cause data loss.
54 Std Network
Software Error This error displays when a network port is detected, but the MFP cannot
establish communications with it.
Press Go to clear the message. The MFP disables all communications to the
network interface.
56 Standard USB
Port Disabled
Displayed when status is requested over the USB port, but the port has been
disabled. Once the error has been displayed for the first time, reporting of further
errors is suppressed until the menus are entered or the MFP is reset.
The following actions may be taken:
• Press Go to clear the message. The MFP discards any data received on the
USB port.
• Press Menu until Busy/Waiting appears, and select Reset Printer.
84 Photoconductor
Life Warning This message displays when the photoconductor unit is near end of life.
Press or Start to clear the message and continue printing.
Press Stop to cancel the job being processed.
84 Replace
Photoconductor This message displays when the photoconductor is at the end of life. The
photoconductor must be replaced.
88 Toner Low This message displays when toner low occurs and the toner low alarm is
activated.
Press or Start to clear the message and continue printing.
Press Stop to cancel the job being processed.
Printer specific user attendance messages (Continued)
Message Explanation
manuals4u.com manuals4u.com