![Lexmark 5470 - X Color Inkjet Скачать руководство пользователя страница 153](http://html1.mh-extra.com/html/lexmark/5470-x-color-inkjet/5470-x-color-inkjet_user-manual_1888934153.webp)
Cannot print from digital camera using PictBridge
These are possible solutions. Try one or more of the following:
E
NABLE
P
ICT
B
RIDGE
PRINTING
FROM
CAMERA
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.
M
AKE
SURE
THE
CAMERA
IS
A
P
ICT
B
RIDGE
-
ENABLED
DIGITAL
CAMERA
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
C
HECK
USB
CABLE
Use only the USB cable that came with the camera.
R
EMOVE
MEMORY
CARDS
Remove any memory cards from the printer.
C
HECK
MESSAGES
If an error message appears on the display, see “Error messages on the computer screen” on page 177.
Partial 4 x 6 in. (10 x 15 cm) photo prints when using a
PictBridge-enabled digital camera
M
AKE
SURE
PHOTO
SIZE
AND
PAPER
SIZE
ARE
SET
CORRECTLY
The printer displays the
Paper/Photo Size Error
when your chosen photo size does not match the paper
size that is set. This typically happens when you are trying to print from your PictBridge-enabled digital camera.
You may have left the printer control panel Photo Size menu item setting at
8.5 x 11 in.
or
5 x 7 in.
size,
but your camera has a print size of
4 x 6 in.
or
L
. You need to make sure your chosen photo size on the printer
is
4 x 6 in.
or
10 x 15 cm
, depending on the typically used photo size for your country or region.
•
Make sure the 4 x 6 in. (10 x 15 cm) photo paper is loaded correctly in the paper support.
•
If your camera lets you change the print size setting, change the print size selection to 4 x 6 in. (10 x 15 cm) on
the PictBridge-enabled digital camera.
•
If your camera does not allow you to change the paper size setting, use the control panel to change the paper
size to 4 x 6 in. (10 x 15 cm).
1
Insert the USB cable that came with your camera to the camera, and insert the other end into the PictBridge
port on the front of the printer.
2
Turn the camera on, and choose your first photo using the camera control panel.
3
Wait for
PictBridge Printing
to appear on the display of the printer control panel.
Note:
If
Paper/Photo Size Error
appears, press
to clear the error message.
Troubleshooting
153
Содержание 5470 - X Color Inkjet
