Lexmark 4443-301, Руководство по обслуживанию

Страница: 27 / 85

2-8
Service Manual
Lexmark S500 Series
1217 Printhead Temperature Error There is a problem determining
temperature. Technical Support Center:
Check and clean the contacts. If the
problem persists, then replace the
printhead.
Service:
Check and clean the contacts. If the
problem persists, then replace the
printhead.
1218 Serial Flash Error Invalid parameters have been
passed to ReadFlashPage. Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the All-In-
One.
Service:
Replace the system board. See “System
board removal” on page 4-26 .
1219 Undefined Signal Error Microprocessor has
encountered a bad signal
(other than an abort, illegal
instruction, or arithmetic
exception). Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in and turn the power on. If the
problem remains, then replace the USB
cable.
Service:
Replace the system board. See “System
board removal” on page 4-26 .
2100 Unlock Scanner Scanner mechanism is locked
in place or unable to move due
to other failure. Technical Support Center:
Replace the All-In-One.
Service:
Replace the scanner assembly. See
“Scanner assembly removal” on
page 4-3
.
2200 Scan Carrier Stall The scan carrier has stalled. Technical Support Center:
Unplug the All-In-One from the wall outlet;
wait a few seconds, then plug the All-In-
One back in, and turn the power on. If the
problem remains, then replace the All-In-
One.
Service:
Replace the scanner assembly. See
“Scanner assembly removal” on
page 4-3
.
Error
Code
Name Description Action