Lexmark 4036-307, Руководство по обслуживанию

Страница: 21 / 134

Diagnostic information
2-7
4036-307, -308
If restarting job,
replace originals
that have not
begun to exit the
scanner. One or more messages that
interrupted a scan job are
now cleared. A situation exists
where a page is not
completely scanned, but it
has not fully exited the ADF. Replace the original documents in the
scanner to restart the scan job.
Touch Restart job if page level recovery is
active and the job is restartable. The
message clears. A new scan job
containing the same parameters as the
previous job starts.
Touch Cancel Job if a scan job is
processing when the attendance message
appears. This cancels the job and clears
the message.
Touch Scan from Automatic Document
Feeder if the page jam recovery is active.
Scanning resumes from the ADF
immediately after the last successfully
scanned page.
Touch Scan from flatbed if page jam
recovery is active. Scanning resumes from
the flatbed immediately after the last
successfully scanned page.
Touch Finish job without further
scanning if page jam recovery is active.
The job ends at the last successfully
scanned page, but the job is not canceled.
Successfully scanned pages go to their
destination: copy, fax, e-mail, or FTP.
Insufficient
Memory to Support
Scanner Attachment The mono printer does not
have at least 256 MB of total
memory or the color printer
does not have 768 MB or total
memory; therefore, it cannot
support the scanner. This
message occurs only during a
power-on reset. 1. Turn the printer off. Turn the scanner
off.
2. Install additional memory in the printer,
so the scanner will function with the
printer.
3. Turn the printer on.
Memory full,
cannot print faxes The attempt to print the fax
jobs is automatically
canceled. The Fax code
recognizes that the fax job is
canceled and does not delete
pages in the fax job that have
not printed. The Fax code
does not attempt to reprint the
fax causing the memory error
until the MFP goes through a
power on reset. Touch Continue to clear the message.
Turn the printer off and then on to reset it.
User attendance messages (continued)
Error
code Sub
codes
Display text Description Action