Lexmark 4036-307, Руководство по обслуживанию

Страница: 23 / 134

Diagnostic information
2-9
4036-307, -308
Restore held jobs? Held jobs are found on the
hard disk after a power-on
reset of the MFP. Touch Yes to restore the held jobs to the
hard disk and make them available. The
jobs data remains on the hard disk;
however, the job control information is
stored in the MFP memory. Touch Quit to
stop restoring held jobs before all jobs are
restored. Unrestored jobs remain on the
hard disk and are retrievable again only at
the next power-on reset.
A pop-up screen appears to indicate
Restoring held jobs(s) xxx/yyy, where xxx
indicates the number of the current job
being restored, and yyy is the total number
of jobs to be restored.
Touch Do not restore to have the held
jobs remain on the hard disk until they are
deleted.
Scan Document Too
Long The scan job exceeds the
maximum number of pages. Note: The scanner finishes scanning
current pages in the ADF, but data is lost
when the job cancels itself after reaching
the maximum number of pages.
Touch Continue to clear the message.
Touch Cancel Job to clear the message if
the job is restartable.
Touch Restart job if the job is restartable.
The message clears, and a new scan job
containing the same parameters as the
previous job starts.
Scanner ADF Cover
Open The scanner automatic
document feed cover is open. The message clears when the cover is
closed.
Scanner
registration
successfully
completed Scanner registration is
successful. Touch Continue to clear the message.
Some held jobs
were not restored Some held jobs are not
restored; they remain on the
hard disk and are
inaccessible.
Note: This message appears
once after the MFP firmware
tries to restore all the held
jobs on the hard disk
regardless of the number of
held jobs not restored.
Touch Continue to clear the message.
35
Insufficient
memory to support
Resource Save
feature
The MFP lacks the memory
needed to enable Resource
Save. This message usually
indicates too much memory is
allocated for one or more of
the MFP link buffers. Touch Continue to disable Resource Save
and continue printing.
Install additional memory.
36 Printer service
required The MFP requires servicing. Touch Continue to clear the message,
continue printing, and show the next
message about the service needed, such
as Toner Low. Complete the necessary
service for the MFP.
User attendance messages (continued)
Error
code Sub
codes
Display text Description Action