Lexington Forge SSI30 Скачать руководство пользователя страница 2

Страница: 2 / 28

63D4004

CONTENTS

Specifi cations ................................................................... 03

Questions? ......................................................................... 04

Pre-installation instructions .............................................. 05

Unpacking and installation .............................................. 07

Removing the fl ue collar ................................................... 08

Fan wiring conversion ....................................................... 09

Blower and ash lip assembly ............................................. 10

Clearances to combustibles ............................................... 11

Calculating alternate fl ooring materials ............................ 12

Proposition 65 Warning:

Fuels used in gas, woodburning or oil fi red appliances, and the

products of combustion of such fuels, contain chemicals

known to the State of California to cause cancer, birth

defects and other reproductive harm.

California Health and Safety Code Sec. 25249.6

ARNING

ACCESSORIES

  1.   Gold Door Trim—Part no.: SSW30GDTK
  2.   Nickel Door Trim—Part no.: SSW30NDTK
  3.  Adjustable Raised Hearth Kit—Part no.: SSI30AH
  4.  Offset Flue Kit—Part no.: OFC3 & OFC6

Chimney clearances .......................................................... 13

Insert and pipe instructions ............................................... 14

Installing insert .................................................................. 15

Operation ........................................................................... 16

Maintenance ...................................................................... 18

Replacement parts ............................................................. 21

Illustrated parts breakdown ............................................... 22

FAQs ................................................................................. 23

Warranty ............................................................. Back Cover

IMPORTANT

Read these instructions carefully before installing or trying to operating this woodburning appliance.

INSTALLER

Please leave these instructions with the appliance.

OWNER

Please retain these instructions for future reference.

CAUTION

THIS HEATER IS EXTREMELY HOT WHILE IN OPERATION.

SERIOUS BURNS CAN RESULT FROM CONTACT.

KEEP CHILDREN, PETS, CLOTHING AND FURNITURE AWAY

DANGER

RISK OF ELECTRIC SHOCK.

DISCONNECT POWER BEFORE

SERVICING UNIT.

• OPERATE THIS HEATER ONLY WITH THE DOOR CLOSED.

• DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS.

• DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE.

Содержание SSI30





























Результаты поиска

Содержание SSI30

Отзывы:

Похожие инструкции для SSI30

Бренды по названию

Популярные бренды

Lexington Forge SSI30, Руководство пользователя

Результаты поиска

Содержание SSI30

Отзывы:

Похожие инструкции для SSI30

Бренды по названию

Популярные бренды