Lexicon RV-8, Руководство пользователя

Страница: 62 / 238

DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%! D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
5.1a 5.1a FILM
MAIN ADVANCED
ZONE2 IN
DIGITAL
ZONE2 ADVANCED
SETUP
RV-8
3-9
ANLG IN LVL
Opens the ANLG IN LVL menu shown above, which can be used to
adjust 2-channel analog audio input levels for the selected input.
Despite attempts at standardization, analog audio sources have a
wide range of levels. To compensate for this, the RV-8 allows inde-
pendent input level adjustment for each of its stereo analog audio
input connectors, multichannel analog audio input connectors,
phono input and the internal tuner. Input level adjustment is not
available when analog bypass is on.
Note:
Adjustments made on the ANLG IN LVL menu are
applied to the analog audio input connector assigned
for the selected input. When another analog audio
input connector is assigned, these adjustments are
automatically applied to the new connector.
ANLG IN LVL DVD1 INPUTS SETUP
AUTO
ON, OFF
Provides automatic adjustment of analog audio input levels. When
set to ON, the RV-8 automatically monitors and optimizes input lev-
els. When the input signal is too high, the RV-8 quickly decreases
input levels to avoid overload. When the input signal is too low, the
RV-8 slowly increases input levels to maximize the signal-to-noise
ratio and dynamic range.
When the AUTO parameter is set to OFF, the RV-8 does not provide
automatic adjustment of analog audio input levels. Rather, input
levels must be adjusted with the ANLG IN LVL MANUAL parameter
(next page).
AUTO ANLG IN LVL DVD1 INPUTS SETUP
ANLG IN LVL ANALOG 1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
PHONO
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
DVD1 ANLG IN LVL
AUTO ON
MANUAL +0dB
AUTO GAIN +0.0dB
L C R SL SR SB LFE
X X X X X X X
0
-6
-15
-30
-45
dB
AUTO ON
ON
OFF