Zone 2 and Zone 3 Audio Performance
Audio Input & Output Connectors
Main Zone Audio Performance
Main Zone Audio Performance
(continued)
Appendix A
Lexicon
A-2
SPECIFICATIONS
• 8 Stereo (RCA)
or
5 stereo and one 5.1-channel
or
2
stereo and two 5.1-channel connectors
• 4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink)
connectors
• Coaxial and optical input connectors conform to IEC-
958, S/PDIF standards
• Accept 44.1, 48, 88.2, and 96kHz sample rates
• Accept 16-24 bits PCM audio, Dolby Digital, DTS,
DTS-ES, and DTS-96k discrete data formats
8 Unbalanced (RCA) connectors for Front L/R, Center,
Sub, Side L/R and Rear L/R
• 1 Unbalanced (RCA, variable output level) stereo
connector
• 1 Unbalanced (RCA, fixed output level) stereo con-
nector
• 1 S/PDIF coaxial (RCA) connector and 1 optical
(Toslink) connector
Analog Audio Inputs
Digital Audio Inputs
Zone 2 Audio Outputs
Main Zone Audio
Outputs
24-bit, 96kHz, dual-bit
∆∑
architecture
24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture
20Hz to 20kHz, +0.1dB/-0.1dB, -0.25dB at 10Hz,
-0.5dB at 40kHz, reference 1kHz
• 105dB minimum, 22kHz bandwidth, “A” weighted
A/D Conversion
D/A Conversion
*Frequency Response
*THD + Noise
*Dynamic Range
200mVrms (2Vrms for maximum output level) at 0dB
input gain
100k
Ω
in parallel with 150pF
• 150mVrms typical, 6Vrms maximum (RCA connectors)
• Maximum value with full-scale input signal and volume
at +12dB
500
Ω
in parallel with 150pF (RCA connectors)
Input Sensitivity
Input Impedance
Preamp Output Level
300
Ω
in parallel with 150pF
Preamp Output
Impedance
24-bit, 44.1 48, 88.2, 96kHz, multi-bit
∆∑
architecture (Zone 2 only)
10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz,
reference 1kHz
Below 0.005% at 1kHz, (1Vrms output level)
101dB minimum, 22kHz bandwidth
101dB minimum, 22kHz bandwidth
200mVrms (4Vrms for maximum output level)
100k
Ω
in parallel with 150pF
• 200mVrms typical, 4Vrms maximum
• Maximum value with full-scale input signal and volume
at 0dB
A/D Conversion
Frequency Response
THD + Noise
Dynamic Range
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Preamp Output Level
Zone 3 Audio Outputs
1 Stereo (RCA, variable output level) connector
Headphone
1 Stereo (1/4-inch phone) connector
Amplifier
7 Channels, 2 channels assignable to Zone 2 or
Zone 3
D/A Conversion
24-bit, 44.1 to 192kHz, multi-bit
∆∑
architecture
*
Combined measurements of preamplifier and power amplifier sections
*Signal-to-Noise Ratio
• 105dB minimum, 22kHz bandwidth, “A” weighted
• 102dB minimum, 22kHz bandwidth, unweighted
• 102dB minimum, 22kHz bandwidth, unweighted
Preamp Output
Impedance
Below 0.02%, 20Hz to 20kHz, 140Wrms all channels
driven
Содержание RV-8
