Lexicon MC-12HD, Руководство пользователя

Страница: 86 / 214

Setup
Lexicon
3-44
AUTOMATIC CALIBRATION
(continued)
CHECKING THE MICROPHONES
Note the following:
• The MC-12HD outputs calibration noise signals between 55
and 95dB, beginning with 55dB and increasing in 5dB incre-
ments until the microphones detect the required level. If the
calibration noise signal becomes too loud, press the
arrow
button to cancel the microphone check.
• Although the calibration noise signal is output at a fixed
volume level, you should set all volume controls for associated
components (i.e. speakers, subwoofers, and power amplifiers)
to a reasonable level before performing automatic calibration.
When the procedure is finished, the MC-12HD automatically
reverts to the last volume level that was selected before
automatic calibration began.
• During automatic calibration, you should refer to the on-screen
display instead of the front panel display, as additional informa-
tion and instructions are available on the on-screen display.
To perform a microphone check
1. Select the SPEAKER SETUP menu CHECK MICROPHONES
option as shown above.
2. The first CHECK MICROPHONES screen opens in the on-screen
display, indicating the importance of proper microphone
placement to achieve accurate automatic calibration results.
3. Press the arrow button to begin the microphone check. The
following screens appear in the on-screen display as the micro-
phone check is performed:
CHECKING FOR SILENCE
Appears in the on-screen display while the
relative noise level of the listening space
and the internal noise level of the
microphones are calculated. After
undetected or malfunctioning microphones are eliminated, an
average level for all microphones is calculated.
CHECKING MICROPHONES
Appears in the on-screen display while
the MC-12HD confirms the microphone
level calculated during the silence
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
CHECK MICROPHONES
GROUP MICROPHONES
INTO A BUNDLE IN THE
SET CROSSOVERS
BEFORE CALIBRATING
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
MIDDLE OF THE ROOM
PRESS TO BEGIN
MIC CHECK
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
CUSTOM SETUP CHECK MICROPHONES
CHECKING FOR SILENCE
PLEASE WAIT
CUSTOM SETUP CHECK MICROPHONES
CHECKING MICROPHONES
PLEASE WAIT