16
EN
G
LIS
H
17
Temperature
1. Press the
ºC/ ºF
.button.to.toggle.between.temperature.display.in.
Celcius (ºC) and Farenheit (ºF).
2. Temperature will be detected once every 12 seconds. Detection
range is: -10 ºC~50 ºC (14 oF~122 ºF) and accuracy is: +/- 1 ºC.
Temperature.detection.will.be.suspended.when.the.alarm.clock.is.
ringing.or.when.it.is.checking.for.RCC.signal.
Alarm Mode
Your.
RLR800
alarm clock has 2 alarm settings:
AL1
.and.
AL2
.which.
can.be.set.independently.
Display the set times for AL1 and AL2
1. In normal clock display mode, press the SET button once to display
the set time for ALARM 1. The display shows AL1 on the right.
2. Press the SET button again to display the set time for ALARM 2. The
display.shows.AL.on.the.right.
Adjusting the time for AL1 and AL2
Adjusting the time for AL1
1. In normal clock display mode, press the
SET
.button.
ONCE
.to.display.
the set time for ALARM 1. The display shows
AL1
.on.the.right.
2. Once the display shows the set time for AL1, press the
SET
.button.
for..seconds.to.enter.in.the.alarm.time.setting.mode..A.bell.symbol.
appears.on.the.display.between.the.hour.and.the.minutes.
..You.can.adjust.the.hour.and.minutes.by.pressing.the.
UP
.or.
DOWN
.
buttons.and.then.pressing.
SET
each time to confirm.
4..The.display.then.goes.back.to.normal.clock.display.mode.and.the.bell.
symbol remains on the display to signal that AL1 is on.
