DATE/MONTH/YEAR SETTING
After clock 1 is set, press mode [1] to accept the time settings. Upon pressing mode, the month
and date will flash.
Press the Hour/+ [2] to set the month.
Press the Minute/- [3] to set the date.
Press mode [1], the year will flash. Press the Hour/+ [2] to move the year upwards and
Minute/- [3] to move the year downwards. Press mode [1] to confirm all your settings.
Clock 2 Settings (Dual Time)
Scroll to Clock 2 using mode [1].
Press + [2] or – [3] key to change the hour (in hour increments/decrements relative to Clock 1).
Alarm 1 and Alarm 2 Setting
Scroll to Alarm1 mode (Alarm2 mode) using MODE [1].
Press HOUR/+ [2] to set the hour.
Press MIN/- [3] to set the minutes.
Press Snooze [5] to toggle alarm on and off. When the alarm is set ON,
the bell symbol will appear.
When Alarm Sounds
a. 1 or 2 will flash.
b. Press Snooze [5] to snooze the alarm for 5 minutes. After that the alarm will
sound again.
c. Press ANY other key to turn the alarm sound off. If not manually interrupted, the alarm sound will
automatically stop after one minute.
Copyright © Lexibook 2006
SM1760IM0036 GB9
English
English
9
1
2
1
2
1
2
3
3
4
ALARM SETTING
MOON PHASES
TEMPERATURE & HUMIDITY DISPLAY
Copyright © Lexibook 2006
SM1760IM0036 GB10
10
Throughout the 28 days of the lunar month, the aspect of the moon changes. Indeed, the moon, being
spherical, is always half lightened up by the sun. As the moon rotates around the Earth, the appearance
of its lightened side changes continuously. This phenomenon creates moon phases. The moon phase
on your MeteoClock is automatically updated according to the year/ month/day.
Moon Phase Display
1. New Moon
2. Young Crescent
3. First Quarter
4. Waxing Gibbous
5. Full Moon
6. Waning Gibbous
7. Last Quarter
8. Old Crescent
Check Inside Temperature and humidity
After inserting the batteries, the local temperature and humidity will
be displayed [*].