Lex System SHARK series, Инструкция по сборке

Страница: 4 / 22

1
1. Unscrew ten (M2.5*4) screws from the
bottom cover and then lift the cover out
of the system. (Fig.1)
3. Install the mSATA into the connector
slot at a 45 degree angle. (Fig.3)
2. Unscrew the(M2*6) screw from the screw
thread on motherboard. (Fig.2)
4. Push the mSATA down to the motherboard
Fasten mSATA with the (M2*6) screw.
(Fig.4)
(Fig.1)
(Fig.3)
(Fig.2)
45°
(Fig.4)
SHARK Waterproof Assembly guide